ViewSonic Corporation Confidential - Do Not Copy VG930m-3_VA930m-1
30
EDID
Note: After having assembled the monitor, please do the DDC Key In procedure. If you find the DDC does not
conform to the monitor, please do the DDC Key In again .
17.3. 1 Equipment Needed
- VG730 Series Monitor
- RS232-VGA Cable*1
- RS232-DVI Cable*1
- AC POWER Cable*1
- TEST PC with WindowsXP
- Display Data Channel (D8330 DDC Card) to plug PC_PCI _Slot
- DYNACOLOR DDC Tester System software
- Barcode Scanner *1
- AC POWER Source
- one additional monitor for Test System displaying
RS232-VGA Cable AC POWER Cable RS232-DVI Cable
DDC TESTER SOFT
PC
DDC CORD Barcode Scanner
D8330 CORD
To Next Page
Loading...
