ViewSonic Corporation Confidential - Do Not Copy VG930m-3_VA930m-1
31
17.3.2 Setup Procedure
17.3.2.1 Open computer’s box cover, pluged D8330 CORD in PCI slot, closed cover and connect AC power
, Monitor, Barcode Scanner, Mouse, Keyboard with PC Connect RS232-VGA cable to DDC RS232 OUT port
of PC ( if you do DDC Key In for D_SUB )
17.3.2.2 Connect RS232-DVI cable to DDC RS232 OUT port of PC ( if you do DDC key In for D_DVI ).
NOTE:
Barcode Scanner and Keyboard pluged in Keyboard port of computer together
17.3.2.3 DDC TESTER SYSTEM SOFT SETUP( from setup file )
NOTE:
Before install DDC Tester System Soft , please checking the D8330 CORD is plugged Or the DDC Tester
application could’t be run .
17.3.2.3.1 Install DDC Tester System by selecting and checking setup.exe icon. Press “YES” or “NEXT”
Buttons until the installation is completed.
RS232-VGA & RS232-DVI coble
DDC RS232 output port
To Next Page
Loading...
