ViewSonic VNB131 - Touchpad; Touchpad Basics

ViewSonic VNB131 12
Touchpad
The built-in touchpad is a pointing device that senses movement on its surface. The
cursor responds as you move your nger across the surface of the touchpad.
Touchpad basics
The following items show you how to use the touchpad:
• Move your nger across the touchpad (1) to move the cursor on the display (2).
• Move your nger up or down across the right edge of the touchpad (5) to scroll.
• Press the left (3) and right (4) buttons located beneath the touchpad to perform
selection and execution functions. These two buttons are similar to the left and right
buttons of a mouse. Tapping on the touchpad is the same as clicking the left button.
Function Left button (3) Right button (4) Main touchpad (1)
Execute Quickly click twice.
Tap twice (at the same speed as double
clicking a mouse button).
Select
Click once. Tap once.
Drag
Click and hold, then use
nger on the touchpad
to drag the cursor.
Tap twice (at the same speed as double
clicking a mouse button), rest your
nger on the touchpad on the second
tap and drag the cursor.
Access context menu Click once.
When using the touchpad, keep it — and your fingers — dry and clean. The touchpad is
sensitive to nger movement, hence, the lighter the touch, the better the response. Tapping
harder will not increase the touchpad’s responsiveness.