ViewSonic VP2458

50
Auto Pivot
With the Auto Pivot funcon, the monitor can detect the image display and adjust
the image’s orientaon on the screen automacally when pivong the screen
vercally or horizontally.
The applicaon installaon le is in the soware folder of the ViewSonic® CD. Or
you can visit: hp://color.viewsonic.com/support/soware/ to check and download
the latest version of the Auto Pivot applicaon.
NOTE: The Auto Pivot funcon uses DDC/CI to communicate with the monitor.
Before applying the Auto Pivot funcon, please make sure the DDC/CI
seng is set to On.
To enable the DDC/CI seng, do the following:
1. Open the OSD Menu and select the Setup Menu menu. Then press the 3 key to
enter the menu.
2. Press the 1 or 2 key to select DDC/CI. Then press the 3 key to enter its sub-menu.
3. Press the 1 or 2 key to select On. Then press the 3 key to conrm.
VP2458
1920 X 1080@60HZ
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
DDC/CI
Save As
All Recall
On
Off