10
1. Insert the SD/MMC/MS card into the 3-in-1 card slot with
the metallic contacts facing towards the display.
2. Push a USB memory stick into the USB HOST
slot.
Note:
y Do not use any force while inserting a memory card or attaching a memory stick.
y The 3-in-1 card slot only reads one memory card at a time. Do not insert more than one card into one memory card
slot.
y To remove the cards or the USB memory stick, pull it out gently.
Copy files from computer
You can connect the digital photo frame to a computer copy files to the memory device connected to the digital photo frame
or to the built-in memory (depends on the unit you purchase).
1. Make sure that your computer has been started before you start.
2. Connect the mini plug of the USB cable to the mini USB port on digital photo frame, and push the other end into a free
ViewSonic
VFM842/VFM1042
To Next Page
Loading...
