To Next PageTo Next PageWhy is there no audio output from my ViewSonic VS16492 Monitor?
If you're experiencing no audio output from your ViewSonic Monitor, and you are using headphones, make sure the mini stereo jack is properly and securely connected. Also, verify that the volume is not muted and is not set to 0. Lastly, check the Audio Input setting.
How to adjust brightness on ViewSonic Monitor if the screen image is too light or dark?
If the screen image on your ViewSonic Monitor is too light or dark, you can adjust the brightness and contrast settings. Alternatively, you can reset the monitor to its factory settings.
How to troubleshoot a ViewSonic Monitor that has no power?
First, ensure that you have turned on the ViewSonic monitor using the power button. Next, check that the power cord is correctly and securely connected to both the monitor and the power outlet. To confirm the outlet is working, plug another electrical device into it.
What to do if ViewSonic VS16492 Monitor has power but no image?
If your ViewSonic monitor has power but no image, first verify that the video cable connecting the monitor to the computer is properly and securely connected. Then, adjust the brightness and contrast settings. Finally, ensure that you have selected the correct input source.
How to adjust brightness on ViewSonic Monitor when the screen is too light or dark?
If the screen image on your ViewSonic monitor is too light or dark, adjust the brightness and contrast settings using the OSD Menu. If that doesn't work, try resetting the monitor to its factory settings.
What to do if ViewSonic VS16492 Monitor control panel keys do not work?
To resolve issues with control panel keys not working on your ViewSonic Monitor, ensure you press only one key at a time. If the problem continues, try restarting the computer.
What to do if the Quick Menu doesn’t appear on ViewSonic VS16492?
If the Quick Menu doesn’t appear on your ViewSonic Monitor, try restarting the computer. If that doesn't work, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor again. As a final option, reset the monitor to factory settings.
Why are some menus not selectable in the OSD on my ViewSonic VS16492 Monitor?
If some menus are not selectable in the OSD of your ViewSonic Monitor, try restarting the computer. You can also try adjusting the ViewMode or the input source. If the issue persists, reset the monitor to its factory settings.
What to do if external device is connected, but no image appears on the ViewSonic screen?
If an external device is connected to your ViewSonic monitor but no image appears, first make sure the power is on. Then, adjust the brightness and contrast via the OSD Menu. Finally, check the connecting cable and ensure it is properly and securely connected.
What causes the screen image to cut in and out on a ViewSonic VS16492?
If the screen image on your ViewSonic monitor cuts in and out, ensure that the correct input source is selected. Also, check the video cable connector for any bent or broken pins. Finally, make sure the video cable connecting the monitor to the computer is properly and securely connected.
General| Panel Type | TN |
|---|---|
| Contrast Ratio | 1000:1 |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 |
| Brightness | 250 cd/m² |
| Ports | VGA |
| Viewing Angle | 170º horizontal, 170º vertical |
Step-by-step guide for attaching the monitor stand.
Instructions for mounting the monitor on a wall using VESA kits.
Details how to connect the monitor to a power source.
Guide to connecting external devices to the VG2419 monitor.
Guide to connecting external devices to the VG2719 monitor.
Steps to turn the monitor on and off.
Explains how to use the monitor's control panel buttons.
Solutions for issues related to the monitor not powering on.
Instructions for obtaining service under the Mexico warranty.
