ViewSonic VS16854 User Manual

CDM5500T
Commercial Display
User Guide
Model No. VS16854
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”

ViewSonic VS16854 Specifications

General

Brand	ViewSonic
Model	VS16854
Category	Monitor
Language	English

Summary

Compliance Information

FCC Interference Statement

Details FCC rules for interference and user guidance.

Canadian Compliance Notices

Information for Canada including ICES and RSS-210 compliance.

RoHS2 Compliance Declaration

RoHS2 Substance Limits

Table showing substance concentrations against proposed maximum limits.

RoHS2 Exempted Components

List of components exempted from RoHS2 directives, with specific conditions.

Safety Precautions

General Safety Warnings

Critical warnings about handling, liquids, voltage points, power cords, and placement.

Environmental and Usage Safety

Guidelines for operating in specific environments and handling the device.

Maintenance and Battery Safety

Recommendations for cleaning and handling remote control batteries safely.

Recommended Use and Ergonomics

Optimal Usage Guidelines

Advice on warm-up, eye rest, positioning, cleaning, and settings for optimal use.

Ergonomic Best Practices

Recommendations for maximizing ergonomic benefits, including signal types and color contrast.

Unpacking and Installation

Product Unpacking Procedure

Steps for opening the package and verifying contents.

Package Contents List

List of included accessories and items to check.

Installation Notes and Precautions

Key considerations for safe and proper installation, including power and environment.

Installing and Removing Table Stands

Table Stand Installation Steps

Step-by-step guide for attaching the display's table stands.

Table Stand Removal Procedure

Steps for detaching the display's table stands.

Mounting on a Wall

Wall Mounting Kit Requirements

Instructions and requirements for wall mounting, including VESA standards.

Ventilation Requirements for Wall Mounts

Guidance on leaving space around the display for heat dissipation.

Mounting in Portrait Position

Rotating Display for Portrait Mode

Guidance on rotating the display for portrait orientation.

Parts and Functions Overview

Control Panel Button Functions

Detailed explanation of buttons on the display's control panel.

Remote Sensor and Status Indicator

Functionality of the remote sensor and power status LED lights.

Security Lock Feature

Description of the security lock for theft prevention.

Input/Output Terminals

Power, Video, and Audio Ports

Details on AC IN, HDMI, DVI, DisplayPort, and AUDIO OUT terminals.

Data and Control Ports

Explanation of IR, RJ-45, RS232C, USB-B, and USB PORT terminals.

Media Storage Ports

Description of MICRO USB and MICRO SD slots.

Remote Control Operation

General Remote Control Functions

Explanation of buttons for power, source, menu, navigation, and adjustments.

Remote Control ID Setting

Procedure to set a unique ID for controlling multiple displays.

Remote Control Management

Battery Installation and Handling

Instructions for inserting batteries and safe handling of the remote control.

Remote Control Operating Range

Guidelines on distance and angle for effective remote control use.

Connecting External Equipment

Connecting Video Sources

Guide for connecting DVD/VCR/VCD and PC via HDMI and VGA inputs.

Connecting PC via DVI and HDMI

DVI Input Connection

Steps for connecting a PC using the DVI input.

HDMI Input Connection

Steps for connecting a PC using the HDMI input.

Audio and Display Connectivity

Connecting PC via DisplayPort

Steps for connecting a PC using the DisplayPort input.

Connecting External Audio Devices

Guide for connecting audio equipment like stereo amplifiers.

Daisy-Chain Configuration

RS232 Control Connection

How to connect displays for control using RS232 daisy-chaining.

Digital Video Signal Connection

Connecting displays via DVI and DisplayPort for daisy-chaining video.

IR Connectivity

IR Signal Connection

Connecting displays for IR signal pass-through.

IR Pass-through Operation

How to use IR pass-through for remote control signals.

Display Operation Modes

Selecting Video Sources

How to switch between different input sources like HDMI, DP, VGA.

Adjusting Picture Format

Options to change aspect ratio and display format (FULL, NORMAL, etc.).

Media Player Basic Settings

Configuring display settings for media playback.

Signage Manager for Content Playback

Creating and Publishing Content Playlists

Using Signage Manager to create playlists and publish content.

Web Browser Functionality

Web Browser Settings and URL Editing

How to access settings, edit URLs, and manage the browser.

Importing and Exporting URLs

Managing URL lists by importing from or exporting to storage.

PDF Reader Application

Playing PDF Playlists

Selecting and playing playlists for PDF files.

Composing and Setting PDF Playlists

Creating, editing, and configuring PDF file playlists.

Custom Application Integration

Selecting and Using Custom Apps

How to choose and run third-party applications like Enplug.

Admin Mode Settings

Wi-Fi Configuration

Enabling/disabling Wi-Fi and connecting to available networks.

Ethernet Configuration

Setting up Ethernet connection, IP types, and MAC address.

Admin Mode: System Configuration

Signage Display Settings

Configuring display name, boot logo, and screenshots.

System Tools and Storage Management

Functions like clear storage, factory reset, and viewing storage space.

App Management and Date/Time Settings

Information on installed apps and setting device date and time.

Advanced Settings and OSD Navigation

Development Settings Options

Options for Android development and debugging.

Device Information and Updates

System updates, Android version, kernel, and build number.

OSD Menu Navigation Guide

How to navigate the On-Screen Display using remote or panel buttons.

Display Settings: Picture Menu

Picture Adjustment Controls

Brightness, Contrast, Sharpness, Black Level, Tint, Color, Noise Reduction adjustments.

Advanced Picture Settings

Gamma Selection, Color Temperature, Color Control, and Picture Mode settings.

Screen Settings Overview

Overscan, Blue light filter, Flicker Free, and Picture Reset options.

Display Settings: Screen Menu

Screen Position and Clock Adjustments

H Position, V Position, Clock, and Clock Phase adjustments.

Zoom Mode Options

Various zoom modes like Full, Normal, Real, Dynamic, 21:9, and Custom.

Display Settings: Audio Menu

Audio Balance and Tone Controls

Adjusting Balance, Treble, Bass, and Volume for audio output.

Audio Output and Input Settings

Configuring Audio Out, Maximum/Minimum Volume, Mute, Audio Source, and Sync. Volume.

Display Settings: PIP Menu

PIP Mode, Size, and Position Configuration

Selecting PIP sub-mode, size, position, and source.

PIP Audio and Reset Functions

Configuring audio for PIP and resetting PIP settings.

Display Settings: Configuration Menus

Config1 Menu Options

Settings for switch-on state, panel saving, and RS232 routing.

Config2 Menu Options

OSD turn off, transparency, logo, monitor ID, and heat status settings.

Display Settings: Advanced Menu

Config2 Advanced Options

Detailed settings within Config2 like OSD H/V position, transparency, logo, monitor ID.

Advanced Menu Core Functions

Options like IR control, keyboard control, and input resolution.

Tiling Functionality for Video Walls

Tiling Configuration Parameters

Creating video walls by configuring H/V monitors and frame compensation.

Tiling Enable and Delay Settings

Tiling Activation and Power Delay

Enabling tiling, setting switch-on delay, and disabling PIP.

Date, Time, and Scheduling

Setting Display Date and Time

Configuring auto sync, manual date/time, and daylight saving.

Schedule Setup

Programming timed power-on/off, input selection, and playlist activation.

Schedule Item Configuration Details

Schedule Item Settings Explained

Explaining power-on/off, input source, date, and playlist selection for schedules.

System Management Features

HDMI CEC and Signal Detection

Managing HDMI CEC and automatic signal source detection.

Power Save Modes and Firmware Updates

Configuring power saving modes and updating firmware via USB/Auto.

USB Cloning and Reset Options

Copying settings via USB and resetting advanced options.

USB Device Compatibility

Supported Photo and Video Formats

Details on compatible image and video file types, codecs, and resolutions.

Supported Audio Formats

List of compatible audio file types, bit rates, and sampling rates.

Input Mode and Resolution Support

PC Input Resolutions

Table of supported PC resolutions, refresh rates, and aspect ratios.

SDTV and HDTV Input Resolutions

Supported SDTV and HDTV resolutions, refresh rates, and modes.

Cleaning and Maintenance

General Cleaning Precautions

Safety warnings and general advice for cleaning the display.

Front Panel and Cabinet Cleaning

Specific instructions for cleaning the display's front panel and cabinet.

Troubleshooting Common Issues

No Picture or Display Distortion

Solutions for issues like no picture, interference, abnormal color, or distorted images.

Audio and Image Fit Issues

Troubleshooting sound problems, image scaling, and after-images.

Technical Specifications

Display Panel Specifications

Screen size, resolution, pixel pitch, brightness, contrast, and viewing angle.

Input/Output Terminal Specifications

Specs for audio, video, RS232, LAN, HDMI, DVI, DisplayPort, and USB ports.

General Electrical and Physical Specs

Power consumption, dimensions, weight, and gross weight.

Environmental and Touch Specifications

Environmental Operating Conditions

Temperature, humidity, and altitude ranges for operation and storage.

Touch Panel Specifications

Details on touch method, accuracy, communication, and supported OS.

RS232 Communication Protocol

RS232 Hardware Specification

Connector type, pin assignments, and communication settings for RS232.

RS232 Command Message Reference

Format for sending commands and expected monitor responses.

RS232 Protocol: Set-Function Commands

Set-Function Command Structure

Format and description of commands to set display functions via RS232.

Set-Function Command Examples

Examples of sending hex commands for brightness and other functions.

RS232 Protocol: Get-Function Commands

Get-Function Command Structure

Format and description of commands to retrieve display status via RS232.

Get-Function Command Examples

Examples of sending hex commands to get brightness and other values.

RS232 Protocol: Get Function Table

Get Function Commands List

Comprehensive list of GET commands, codes, value ranges, and comments.

RS232 Protocol: Get Function Details

Get Function Command Reference

Detailed listing of GET commands for various functions like contrast, volume, mute.

RS232 Protocol: Get Function Details (Continued)

More Get Function Command Details

Further GET commands for Tiling, Date, Time, and Factory Reset.

RS232 Protocol: Remote Control Pass-through

Remote Control Pass-through Format

Format for sending remote control commands via RS232 pass-through.

Remote Control Pass-through Example

Example of transmitting a VOL+ key press via RS232.

RS232 Protocol: IR Pass-through Key Codes

IR Pass-through Key Code Mapping

List of key codes used for IR pass-through mode.

IR Pass-through Mode Notes

IR Pass-through Behavior Details

Important notes on IR pass-through behavior for power and volume keys.

Other Information

Customer Support Contact Information

Table of websites, phone numbers, and emails for regional customer support.

Limited Warranty Information

Warranty Coverage and Exclusions

Details on what the warranty covers and what it does not cover.

Obtaining Warranty Service

Steps required to get service under warranty, including required information.

Warranty Limitations and Legal Effects

Warranty Limitations and State Law Variations

Limitations on implied warranties, damages, and state law variations.

Mexico Limited Warranty

Mexico Warranty Coverage and Exclusions

Specific warranty terms for Mexico, including coverage and exclusions.

Mexico Warranty Service and Claims

Procedure for obtaining warranty service and making claims in Mexico.

Mexico Authorized Service Centers

Contact Details for Mexican Service Locations

Addresses and phone numbers for authorized service providers across Mexico.