ViewSonic VS16854 - Tiling Enable and Delay Settings; Tiling Activation and Power Delay

29
Frame comp. - No
• {Enable}: Choose to enable or disable the Tiling function. If enabled, the display will apply the settings in {H
monitors}, {V monitors}, {Position}, and {Frame comp.}.
• {Switch on delay}: Set the power-on delaying time (in seconds). The default option {Auto} allows a sequential
powering-on for each display by their ID number when multiple displays are connected.
The options are:{Off/Auto/2~255}
NOTE: The Tiling function will be disabled when the PIP enabled.
Off Timer
Set automatically power off time (in hours).