11
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
Maximum
Loading
Hole pattern
(W x H)
Interface Pad
(W x H x D)
Pad
Hole
Screw Specification &
Quantity
14kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5mm
M4 x 8mm
4 pieces
NOTE: Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Remove the monitor stand’s base by unscrewing the three (3) screws from the
monitor stand’s neck.
To Next Page
Loading...
