ViewSonic VS17425 - Page 40

40
Once in the PIP menu:
• To change the input source for the inset window: select PIP Source Select and
press the 3 key. Then press the 1(Shortcut) or 2 key to select the desired input
source and press the 3 key to confirm.
• To adjust the inset window position: select PIP Position and press the 3 key.
• Press the 3 key to select PIP H.Position or PIP V.Position. Press the 1(Shortcut)
or 2 key to adjust the setting and press the 3 key to confirm.
• To adjust the inset window size: select PIP Size and press the 3 key. Then press
the 1(Shortcut) or 2 key to adjust the setting.
• To swap the two windows: select PIP Swap and press the 3 key to confirm.
NOTE: Only an HDMI with a DisplayPort connection can work in PIP. HDMI with
HDMI will not work.