ViewSonic VS18886

17
Installaon
Before Installing
Maintain an adequate air gap between the back of the display and any wall for
proper venlaon.
Ensure there is no direct airow from air condioning or heang vents blowing
on the display.
Avoid installing the display in places with high humidity.
Due to high power usage, always use power cords specically designed for this
product.
Wall Mounng
Installing the Upper and Lower Wall Mount Brackets
50.8 mm
50.8 mm
25.4 mm
7 mm
15 mm
203.2 mm
406.4 mm
609.6 mm
812.8 mm
1016 mm
1219.2
mm
1422.4 mm
1625.6 mm
1828.8
mm
2032
mm
2235.2 mm
2336.8
mm
1. Ensure the wall area and size is an appropriate installaon site.
NOTE: The height of the Upper
Wall Mount Brackets
must not be less than 129
⁵⁹/₆₄" (3300 mm) from the ground.
2. Using the Wall Mount Bracket (pictured above) as a guide, mark at least 12 holes
and pre-drill them.
3. Install the rst Upper Wall Mount Bracket with the provided screws (M6x50mm
Expansion for masonry; TA6x30mm for load bearing wood).
4. Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the
rst upper bracket.
63.2 mm
2.488 in