To Next PageTo Next PageWhy is there no power on my ViewSonic VS18401?
First, ensure that you have turned on the ViewSonic monitor using the power button. Then, verify that the power cord is correctly and securely connected to both the monitor and the power outlet. Lastly, test the power outlet with another electrical device to confirm it is working.
What to do if power is on, but no image appears on ViewSonic VS18401 screen?
Ensure the video cable connecting your ViewSonic monitor to the computer is properly and securely connected. Also, adjust the brightness and contrast settings. Finally, verify that the correct input source is selected.
What to do if the external device is connected, but no image appears on the ViewSonic VS18401 Monitor screen?
Ensure that the power is on. Adjust the brightness and contrast via the OSD Menu. Check the connecting cable and make sure it is properly and securely connected, as loose or broken pins in the cable connector could cause an improper connection.
How to fix wrong or abnormal colors on ViewSonic VS18401?
If any colors (red, green, or blue) are missing on your ViewSonic monitor, check the video cable to ensure it is properly and securely connected. You can also connect the monitor to another computer to test it. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
What to do if screen image cuts in and out on ViewSonic Monitor?
Make sure the correct input source is selected on your ViewSonic monitor. Check the video cable connector for bent or broken pins. Also, ensure the video cable connecting the monitor to the computer is properly and securely connected.
Why is the screen image too light or dark on my ViewSonic Monitor?
Adjust the brightness and contrast settings on your ViewSonic monitor via the OSD Menu. Alternatively, reset the monitor to its factory settings.
How to fix a blurred screen image on ViewSonic Monitor?
Adjust the resolution to the correct Aspect Ratio on your ViewSonic monitor. If that doesn't work, try resetting the monitor to factory settings.
Why do USB devices connected to my ViewSonic VS18401 Monitor not work?
First, make sure the USB cable is connected properly to your ViewSonic monitor. If applicable, try changing to another USB port. Note that some USB devices require a higher electric current, so try connecting the device directly to the computer.
Why isn’t the screen centered correctly on my ViewSonic Monitor?
Adjust the horizontal and vertical controls via the OSD Menu on your ViewSonic monitor. Also, check the Aspect Ratio. If problems persist, reset the monitor to factory settings.
Why does the screen appear yellow on my ViewSonic Monitor?
Make sure the “Blue Light Filter” is turned Off on your ViewSonic monitor.
General| Screen Size | 24 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Connectivity | HDMI, VGA |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| Resolution | 1920 x 1080 (Full HD) |
| Viewing Angle | 178° (H) / 178° (V) |
Step-by-step instructions for attaching the monitor stand to the display.
Guide for mounting the monitor to a wall using VESA compatible kits.
Steps to connect the monitor to a power source via the adapter and outlet.
Instructions for connecting video and audio sources like DP and HDMI.
Procedure for powering the monitor on and off using the power button.
Step-by-step guide on navigating and adjusting settings via the OSD menu.
Contact information and resources for technical support and product service.
Details on the product's warranty coverage, duration, exclusions, and how to obtain service.
