To Next PageTo Next PageHow to troubleshoot no power on ViewSonic VS18402 Monitor?
If there is no power to your ViewSonic monitor, first ensure that you have turned on the monitor using the power button. Next, check that the power cord is properly and securely connected to the monitor. Finally, plug another electrical device into the power outlet to verify that the outlet is supplying power.
What to do if external device is connected to ViewSonic monitor, but no image appears?
If an external device is connected to your ViewSonic monitor, but no image appears on the screen, make sure the power is on. Check the connecting cable to ensure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection. Also, adjust the brightness and contrast settings.
How to fix wrong or abnormal colors on ViewSonic VS18402?
If you are experiencing wrong or abnormal colors on your ViewSonic monitor, check the video cable to ensure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection. You can also try connecting the monitor to another computer to see if the issue persists. For older graphics cards, contact ViewSonic® for a non-DDC adapter.
How to adjust screen image that is too light or dark on ViewSonic VS18402 Monitor?
If your ViewSonic monitor screen image appears too light or dark, try adjusting the brightness and contrast settings. If that doesn't work, reset the monitor to its factory settings.
How to fix blurred screen image or text on ViewSonic VS18402?
If the screen image or text on your ViewSonic monitor is blurred, try adjusting the resolution to the correct Aspect Ratio. If the issue persists, reset the monitor to factory settings.
What to do if my ViewSonic VS18402 Monitor power is on but there is no image?
If your ViewSonic monitor's power is on but no image is displayed, ensure the video cable connecting the monitor to the computer is properly and securely connected. Check for any broken pins in the video cable connector. Also, try adjusting the brightness and contrast settings, and make sure the correct input source is selected.
Why does the screen image cut in and out on my ViewSonic VS18402 Monitor?
If your ViewSonic monitor screen image cuts in and out, make sure the video cable connecting the monitor to the computer is properly and securely connected. Also, ensure that the correct input source is selected and check for broken pins in the video cable connector.
How to center the screen correctly on ViewSonic monitor?
If your ViewSonic monitor screen is not centered correctly, adjust the resolution to the correct Aspect Ratio. You can also adjust the horizontal and vertical controls via the OSD Menu, or reset the monitor to factory settings.
What to do if the OSD Menu does not appear on ViewSonic VS18402?
If the OSD Menu does not appear on your ViewSonic monitor screen, first check whether the OSD Menu is locked by pressing and holding keys 2 and 3 for 10 seconds. If that doesn't work, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. As a last resort, reset the monitor to factory settings.
Why does my ViewSonic VS18402 Monitor screen appear yellow?
If your ViewSonic monitor screen appears yellow, make sure the “Blue Light Filter” is turned Off.
General| Panel Type | IPS |
|---|---|
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1000:1 |
| Connectivity | HDMI, VGA |
| Viewing Angle | 178º (H) / 178º (V) |
| Input Connectors | VGA |
