ViewSonic VT2756-L - Connecting External Devices

Getting Started
7
Connecting the LCD TV
Cable System or VHF/UHF Antenna System
Enjoy the high-denition and standard-denition digital programming along with standard-denition
analog programming.
☼
• This TV is capable of receiving unscrambled digital programming for both cable and external VHF/
UHF antenna.
• We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable
(not supplied) to ensure the best picture quality.
Cable or VHF/UHF
75-ohm coaxial cable
Rear side of the TV
VHF/UHF/CABLE input
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and antenna
programming, as shown below.
Cable
Antenna
Rear side of the TV
VHF/UHF/CABLE input
A-B RF switch
☼
• Remember to set the TV/CATV setting in the TV menu to Air or Cable for the type you choose.
HD Cable Box/HD Satellite Box
You can also enjoy high-denition programming by subscribing to a high-denition cable service or
a high-denition satellite service. For the optimum picture quality, be sure to connect this device to
your TV via the HDMI or component video (with audio) input on the rear side of your LCD TV.
HDMI Connection
HDMI cable
HDMI 1 HDMI 2 HDMI 3 SPDIF
OUT
RS232
USB
EARPHONE
OUT
COMPONENT
VIDEO OUT
Pr Y
VIDEO
DVI-HDTV OUT
HDMI OUT
OUT
IN
AUDIO
L
R
Pb
LINE OUT
HDMI cable
HD cable box /
HD satellite box
CATV / Satellite
antenna cable
Rear side of the TV