ViewSonic VTMS2431 - Using TV Remote Control Features; Navigation and Channel Selection; Program Guide and Channel List

To block by Input Source
1. Press ▲ or ▼ to select “Input Block”.
2. Press ▲ or ▼ to select the input source, then press ◄
or ► to select from “Block” or “UnBlock”.
3. Press MENU to exit.
To Restore Factory Setting
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “OPTION” menu.
3. Press ENTER or ► to enter “OPTION” menu.
4. Press ▲ or ▼ to select “Restore Default”, then press ►
to restore the factory default setting.
5. Select “Yes” and press ENTER to conrm the setting.
Setting RS232 Parameter
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “OPTION” menu.
3. Press ENTER or ► to enter “OPTION” menu.
4. Press ▲ or ▼ to select “TV ID”, then press ◄ or ►
to set the TV ID number from 01~99. For detailed
information, please download the complete user guide
from www.viewsonic.com and refer to RS232 Protocol
on page 45~55.
ViewSonic Corporation Confidential - Do Not Copy VTMS2431
24