Using PC Function
1. When in PC source, press the MENU button to display
the OSD main menu.
2. Press ◄ or ► to select the “PICTURE” menu.
3. Press ▲ or ▼ to select your desired controls, and press
◄ or ► to adjust.
4. For advanced PC functions, select “Advanced” (only
in PC source) and press ► to enter.
5. Press ▲ or ▼ to select “Auto” (Auto adjustment),
“H-Pos” (H-Position), “V-Pos” (V-Position), “Clock”
or “Phase”, and adjust the level with ◄ or ►.
＊When in PC source, the other menus are the same as or
similar to when in other source.
＊When there is no signal in the PC mode, “No Signal” will
be displayed on the screen and the TV will automatically
turn into power-saving mode after a few seconds’ idleness.
Press INPUT or POWER button on the remote control
and the TV will return to VGA mode.
To Next Page
Loading...
