ViewSonic VX2240w User Manual

ViewSonic VX2240w 9
Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the OSD controls which display
on the screen. The OSD controls are explained at the top of the next page and are defined in
“Main Menu Controls” on page 11.
Main Menu
with OSD controls
Front Control Panel
shown below in detail
Scrolls through
menu options and
adjusts the
displayed control.
Also a shortcut to
display the
Contrast
adjustment control
screen.
Displays the control screen
for the highlighted control.
Also toggles between two
controls on some screens.
Also a shortcut to Auto
Image Adjust.
Power light
Blue = ON
Orange = Power Saving
Standby Power
On/Off
Displays the
Main Menu or
exits the
control screen
and saves
adjustments.

ViewSonic VX2240w Specifications

General

Pixel pitch	0.282 x 0.282 mm
Response time	2 ms
Display diagonal	22 \
Display resolution	1680 x 1050 pixels
Vertical scan range	50 - 75 Hz
Horizontal scan range	24 - 82 kHz
Contrast ratio (dynamic)	4000:1
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	170 °
Display brightness (typical)	300 cd/m²
HDCP	Yes
DVI-I ports quantity	0
Power requirements	AC 100 - 240 V, 50/60 Hz
Panel mounting interface	100 x 100 mm
Power consumption (typical)	38 W
Power consumption (PowerSave)	1 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Market positioning	-

Weight and Dimensions

Depth (with stand)	225 mm
Height (with stand)	432 mm
Depth (without stand)	61 mm
Width (without stand)	510 mm
Height (without stand)	55 mm
Weight (without stand)	5000 g