ViewSonic VX2728J-2K - Page 32

32
M
Manual Image Adjust
Displays the “Manual Image Adjust” menu. You can manually set a variety of
image quality adjustments.
Memory Recall
Returns the adjustments back to factory sengs if the display is operang in
a factory preset ming mode listed in the “Specicaons” of this manual.
NOTE:
• (Excepon) This control does not aect changes made in the
“Language Select” or “Power Lock” seng.
• Memory Recall is the default as-shipped display conguraon and
sengs. Memory Recall is the seng in which the product qualies
for ENERGY STAR®. Any changes to default as-shipped display
conguraon and sengs would change the energy consumpon,
and may increase energy consumpon beyond the limits required
for ENERGY STAR® qualicaon, as applicable. ENERGY STAR® is a
set of power-saving guidelines issued by the U.S. Environmental
Protecon Agency (EPA). ENERGY STAR® is a joint program of the
U.S. Environmental Protecon Agency
and the U.S. Department of Energy helping us all save
money and protect the environment through energy
ecient products and pracces.
MPRT
Choose whether to acvate Moving Picture Response Time (MPRT); default
seng is O.
NOTE:
1. Make sure Input Timing detecon is >100Hz to turn on 1ms Mode
from default.
2. If 1ms Mode is set to “On”, when turning on FreeSync, MPRT will
automacally turn o.
3. When 1ms Mode is set to “On”, the following funcons will be grayed
out and disabled: Brightness, Advanced DCR, Eco Mode, sRGB,
Response Time, DDC/CI Brightness adjustment.
4. sRGB and 1ms Mode will disable each other.
5. The IC controls Moving Picture Response Time, so the overall
Brightness will be dark.