Why some menus aren’t selectable in the OSD on ViewSonic VX2882-4KP?
If some menus aren’t selectable in the OSD on your ViewSonic Monitor, adjust the ViewMode or the input source. If the issue persists, reset the monitor to factory settings.
How to troubleshoot no audio output on ViewSonic VX2882-4KP?
If you experience no audio output from your ViewSonic Monitor, and you're using headphones, make sure the mini stereo jack is properly connected. Ensure that the volume is not muted and is not set to 0. Also, check the Audio Input setting.
Why USB devices connected to ViewSonic VX2882-4KP do not work?
If USB devices connected to your ViewSonic Monitor do not work, make sure the USB cable is connected properly. Try changing to another USB port, if applicable. Some USB devices require a higher electric current; in that case, connect the device directly to the computer.
What to do if ViewSonic VX2882-4KP Monitor will not adjust?
To adjust your ViewSonic Monitor, make sure there are no obstructions near or on it, and that there is adequate spacing. For more information, see "Adjusting the Viewing Angle".
General| Screen Size | 28 inches |
|---|---|
| Resolution | 3840 x 2160 (4K UHD) |
| Panel Type | IPS |
| Refresh Rate | 60 Hz |
| Contrast Ratio | 1000:1 |
| VESA Mount | 100 x 100 mm |
| Connectivity | HDMI, DisplayPort |
| Viewing Angle | 178° (H) / 178° (V) |
| Color Gamut | 100% sRGB |
| Brightness | 300 cd/m2 (typical) |
| Ports | 1 x DisplayPort, 1 x HDMI |
To Next Page