Name: ViewSonic VX3418-2KPC
Brand: ViewSonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Wall Mounng

NOTE: Only use UL Cered wall mount kits.

75 mm

Refer to the table below for the standard dimensions for wall mount kits.

Maximum

Hole paern

(W x H)

Interface Pad

(W x H x D)

Pad Hole

Screw Specicaon

& Quanty

14 kg 75 x 75 mm 115 x 115 x 2.6 mm Ø 5 mm

M4 x 10 mm

4 pieces

NOTE: Wall mount kits are sold separately. To obtain a wall mounng kit,

contact ViewSonic® or your local dealer.

1. Turn o the device and disconnect all cables.

2. Place the device on a at, stable surface with the screen facing down.

3. Remove the monitor stand.

4. Aach the mounng bracket to the VESA mounng holes at the rear of the

device. Then secure it with four (4) screws (M4 x 10 mm).

5. Follow the instrucons that come with the wall mounng kit to mount the

monitor onto the wall.

75 mm

Questions and Answers:

Need help?

Do you have a question about the ViewSonic VX3418-2KPC and is the answer not in the manual?

ViewSonic VX3418-2KPC Specifications

General