- 11 –
ViewSonic Corporation
Confidential - Do Not Copy VX712
Do the following to adjust the display setting:
1. To display the Main Menu, press button: [1]
NOTE: All OSD menus and adjustment screens disappear automatically after about 30
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2. To select a control to adjust, press ▲ or ▼ to scroll up or down the Main Menu.
3. After the desired control is selected, press button [2]. A control screen like the one shown
below appears.
4. To adjust the setting, press the up ▲ or down ▼ buttons.
5. To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
.Adjust your computer’s graphic card so that is outputs a 1280×1024@60Hz video signal to the
LCD display.(Look for instructions on “changing the refresh rate” in the graphics card’s user
guide.)
.If necessary, make small adjustments using H. Position and V. Position until the screen image is
completely visible.
(The black border around the edge of the screen should barely touch is
illuminated “active area” of the LCD display.)
The line at the bottom of the screen shows
the current functions of buttons 1 and 2:
Exit or select the Bri