44
Menu Option Description
Warping
The function is to configure the geometric distortion of the
projector’s images when the images are projected onto
screens which have a kind of uneven surface such as a cylinder,
a spherical shape, etc.
Enable
Keystone and Corner Adj. will not be available when Warping is
enabled.
Control Method
Allows you to select a preferred control method for warping
adjustment.
Warping Adj.
This function is available when On is selected in the Warping
> Enable menu and OSD is selected in the Warping >
Control Method menu.
1. Use / / / to move the cursor to the point you wish to
adjust.
2. Press Enter to enter adjustment mode.
3. Use
/ / / to shift the point by x and y coordinates.
4. Press MENU to exit adjustment mode.
5. Repeat step 1 to 4 to ajdust another point until you are
satisfied with the projected image.
6. Press MENU/Exit to exit the function.
Reset
Returns settings in the
Warping menu to the factory preset
values.
Zoom
Magnifies the projected image and allows you to navigate the
image.
OverScan
Adjusts the overscan rate from 0 to 5.
To Next Page
Loading...
