To Next PageTo Next PageWhy won't my ViewSonic X10-4K Projector turn on?
If your ViewSonic Projector isn't turning on, first, ensure the power cord is properly attached to both the projector and the power outlet. If it still doesn't turn on, wait until the cooling process has finished, then try again. As a last resort, test another power outlet or electrical device using the same outlet.
What to do if the ViewSonic Projector remote control does not work?
If the remote control for your ViewSonic Projector isn't working, first make sure there are no obstructions between the remote and the projector, and that you're within 8 meters (26 feet). If it still isn't working, check the batteries and replace them if needed.
Why my ViewSonic Projector does not turn on?
If your ViewSonic Projector isn't turning on, make sure the power cord is securely plugged into both the projector and the power outlet. Also, the projector might be in the process of cooling down; wait for it to complete before attempting to turn it on again. Try using a different power outlet or testing the current outlet with another electrical device.
What to do if my ViewSonic Projector remote control does not work?
If your ViewSonic Projector's remote control isn't working, first, make sure there are no obstructions between the remote and the projector, and that you're within 8 meters (26 feet) of the projector. Then, check the batteries and replace them if necessary.
How to fix a ViewSonic X10-4K with no picture?
If your ViewSonic Projector displays no picture, ensure the video source cable is properly connected and that the video source is turned on. If the input source isn't automatically selected, use the Source key on the projector or remote to select the correct source.
How to fix a blurred image on ViewSonic Projector?
If the image on your ViewSonic Projector is blurred, try adjusting the Focus Ring to correctly focus the projection lens. Also, make sure the projector and screen are properly aligned. Adjust the projector's height, projection angle, and direction if necessary.
How to fix no picture on ViewSonic X10-4K Projector?
If there is no picture on your ViewSonic Projector, ensure the video source cable is properly connected and that the video source is turned on. If the input source isn't automatically selected, use the Source key on the projector or remote to select the correct source.
How to fix blurred image on ViewSonic Projector?
To fix a blurred image on your ViewSonic Projector, adjust the Focus Ring to correctly focus the projection lens. Also, make sure the projector and screen are properly aligned, adjusting the projector's height, projection angle, and direction if needed.
What to do if ViewSonic X10-4K Projector is frozen?
If your ViewSonic Projector is frozen and unresponsive, carefully insert a paper clip into the Reset button at the rear of the projector to reset the device.
General| Number of colors | 1.07 billion colors |
|---|---|
| Native aspect ratio | - |
| Projection distance | 0.5 - 3.5 m |
| Vertical scan range | 23 - 120 Hz |
| Horizontal scan range | 15 - 135 kHz |
| Projection technology | LED |
| Contrast ratio (typical) | 3000000:1 |
| Screen size compatibility | 30 - 200 \ |
| Projector native resolution | 2160p (3840x2160) |
| Keystone correction, vertical | -28 - 40 ° |
| Offset | 100 % |
| Throw ratio | 0.8 |
| Fixed focal length | 8.5 mm |
| Focal length range | - mm |
| Aperture range (F-F) | 1.8 - 1.8 |
| HDCP | Yes |
| Interactive | No |
| Noise level | 30 dB |
| Number of OSD languages | 23 |
| Noise level (economic mode) | 26 dB |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FIN, FRE, GRE, IND, ITA, JPN, KOR, POL, POR, RUS, SWE, THA, TUR, VIE |
| Compatible memory cards | MicroSD (TransFlash), MicroSDXC |
| Maximum memory card size | 65 GB |
| Internal storage capacity | 16 GB |
| HDMI connector type | Full-size |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 0 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| Bluetooth version | 4.0 |
| Power source | AC |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 140 W |
| RMS rated power | 8 W |
| Cables included | AC, HDMI, USB |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Placement | Desktop, Ceiling |
| Product type | Short throw projector |
| Product color | Black |
| Market positioning | Home cinema |
| Service life of light source | 30000 h |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p |
| Supported graphics resolutions | 640 x 480 (VGA), 3840 x 2160 |
| Harmonized System (HS) code | 85286200 |
Weight and Dimensions| Depth | 271 mm |
|---|---|
| Width | 261 mm |
| Height | 166 mm |
| Weight | 4100 g |
| Package depth | 330 mm |
| Package width | 340 mm |
| Package height | 285 mm |
| Package weight | 6500 g |
Specific safety guidelines for mounting the projector on a ceiling, emphasizing secure installation.
Lists the key features of the ViewSonic X10-4K projector, including short throw, auto keystone, and connectivity.
Details the items included in the projector package, such as the projector, remote control, and cables.
Provides a visual overview of the projector's controls and functions, including buttons and indicators.
Identifies and describes all available input and output ports on the projector for connectivity.
Explains the function of each button on the remote control for operating the projector.
Details remote control range, and provides steps for replacing its batteries.
Guides on choosing a location, setting orientation, and understanding projection dimensions.
Details the specifications and recommendations for securely mounting the projector.
Connect power, set up vRemote app, and connect audio devices like Bluetooth speakers.
Connect video sources via HDMI/USB-C and configure network connections.
Instructions for powering on, first-time activation, language, and orientation selection.
Select input sources and configure network settings for projector operation.
Explains how to use the adjuster foot to fine-tune image height and angle.
Describes the projector's home screen and how to navigate its main menus.
Guides on using menu functions, apps, and managing files on the projector.
Provides tips for USB usage and lists supported file formats for media playback.
Configure network connections and adjust basic settings like language and keystone.
Adjust date/time settings and perform firmware updates for the projector.
Details how to configure advanced settings like Power On Source and Smart Energy.
Lists technical specifications, dimensions, and timing charts for the projector.
Provides solutions for common problems and guidelines for projector care.
Covers compliance statements, FCC, Industry Canada, CE conformity, and disposal.
Provides support contacts and details the limited warranty terms and conditions.
