ViewSonic X10-4K - Using the Projector; Startup and Initial Setup

33
Using the Projector

1. Ensure the projector’s power cord is properly connected to a power outlet.
2. Press the Power buon to turn on the projector.
 The Status LED will be green during startup.

If the projector is acvated for the rst me, you will need to select your Preferred
Language, Projecon Orientaon, Network Sengs, and Source Input. Follow
the on-screen instrucons using the OK and  buons on the
remote control. When the Finish screen appears, this indicates the projector is
ready to use.
Preferred Language
Select the desired language and press OK to conrm the selecon.