Why ViewSonic PJD6531w Projector has no power after turning on?
If your ViewSonic Projector doesn't power on, first check the AC socket and its connection. Try reconnecting the fan. If that doesn't work, the AC Safety Switch board, keypad, main board, or power board may need to be replaced.
What to do if ViewSonic PJD6531w fails to light up?
If your ViewSonic Projector fails to light up, check the LED indicator and follow the recommended actions. If that doesn't resolve the issue, you may need to replace the Lamp Module, Power board, Ballast, Main board, or CW module.
What to do if ViewSonic PJD6531w Projector shows 'No Signal' from video source?
If your ViewSonic Projector shows 'No Signal' from a video source, ensure the source is turned on. If the issue persists, try replacing the cable. As a last resort, the main board might need replacement.
How to fix 'No Signal' from computer source on ViewSonic PJD6531w?
If your ViewSonic Projector displays 'No Signal' from a computer source, first ensure the source is powered on. If the problem continues, try replacing the cable. If neither works, the main board may need to be replaced.
How to fix abnormal image on ViewSonic Projector?
If the image on your ViewSonic Projector is abnormal, try powering it off and on again, then reset the OSD. If the issue persists, adjust the input cable and signal settings. If these steps don't work, the Main board or Optical Engine may need to be replaced.
Why is color abnormal on ViewSonic Projector?
If the color on your ViewSonic Projector is abnormal, try adjusting the input cable and signal settings. You can also adjust the Color Wheel Index. If the issue continues, the Main board or Optical Engine may need to be replaced.
What to do if remote control fails on ViewSonic Projector?
If the remote control for your ViewSonic Projector fails, first replace the battery. If it still doesn't work, try replacing the remote control itself. If the issue persists, the IR or Main board may need to be replaced.
General| Native aspect ratio | 16:10 |
|---|---|
| Projection distance | 1.2 - 10 m |
| Vertical scan range | 50 - 120 Hz |
| Horizontal scan range | 31 - 80 kHz |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:10 |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 27 - 300 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | ± 40 ° |
| Focus | Manual |
| Throw ratio | 1.5 - 1.8:1 |
| Focal length range | - mm |
| Lamp power | 230 W |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 6000 h |
| Full HD | No |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, PAL, SECAM |
| RMS rated power | 10 W |
| Number of built-in speakers | 2 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 0 |
| S-Video inputs quantity | 1 |
| VGA (D-Sub) ports quantity | 3 |
| Cables included | VGA |
| HDCP | - |
| Noise level | 34 dB |
| Certification | CB, WEEE, UL/cUL, FCC-B, ICES-003, IRAM, NOM, PSB, C-tick, EK, CE, TUV/GS, GOST-R, Hygienic, SASO UKrSEPRO, CCC |
| Noise level (economic mode) | 29 dB |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 305 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Product color | Black |
| Market positioning | Presentation |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 114 mm |
|---|---|
| Width | 280 mm |
| Height | 218 mm |
| Weight | 1850 g |
| Package depth | 305 mm |
| Package width | 345 mm |
| Package height | 220 mm |
| Package weight | 4500 g |
Detailed technical parameters of the projector, including resolution, lamp, and dimensions.
Identifies external components visible from the front of the projector.
Identifies external components visible from the rear and bottom of the projector.
Explains the function of each button and the meaning of the LED indicators on the projector.
Details the various input and output ports available on the projector for connectivity.
Describes the functions of buttons on the projector's remote control.
Details the projector lamp system, its type, and operating characteristics.
Essential safety guidelines for handling and operating the projector lamp.
Visual representation of the projector's internal components and their interconnections.
Lists required items, software installation, and projector preparation for firmware updates.
Step-by-step instructions for executing the projector firmware update.
Lists necessary tools and essential safety warnings for disassembly procedures.
Detailed procedural steps for disassembling the projector's main components.
Instructions for assembling fan modules and replacing the lamp module.
Flowcharts for diagnosing and resolving power, light, sound, signal, image, and operation issues.
Procedures for checking logo, signal, button operation, image quality, and cosmetic standards post-repair.
Identifies connectors and their functions on the projector's main board.
Details connectors for the ballast and power supply boards.
Overview of FRUs, mechanical drawings, and the exploded parts list.
Illustrates how the projector and accessories are packed for shipping.
Guidelines for general maintenance, cleaning the lens, housing, and filter cover.
Procedures for configuring network settings, including DHCP and manual IP assignment.
Accessing and using the web interface for projector control and status monitoring.
Configuration for network parameters, alert notifications, and scheduled operations.
Lists part numbers and descriptions for recommended spare parts for the projector.
Specifies RS-232 communication parameters and details the command set for controlling the projector.
Maps remote control keys to their corresponding IR control codes.
Step-by-step guide on how to reset the projector's lamp hour counter via the menu.
To Next Page
