To Next PageTo Next PageWhat to do if ViewSonic PJD6352 remote control does not work?
If your ViewSonic Projector's remote control isn't working, try these solutions: * Replace the battery with a new one. * Ensure there is no obstacle between the remote control and the projector. * Make sure you are within 8 meters (26 feet) of the projector. * Adjust the remote control code if it's inconsistent with the projector's.
Why my ViewSonic PJD6352 does not turn on?
Your ViewSonic projector might not be turning on due to these reasons: * **No power:** Ensure the power cord is securely plugged into both the projector's AC inlet and a functioning power outlet. If the outlet has a switch, verify it's on. * **Cooling process:** If you've recently turned the projector off, wait for the cooling process to complete before attempting to turn it on again.
How to fix no picture on ViewSonic PJD6352 Projector?
If you're not seeing a picture on your ViewSonic Projector, consider these potential causes and solutions: * **Video source:** Ensure the video source is turned on and the signal cable is correctly connected. * **Connection:** Verify that the projector is correctly connected to the input signal device. * **Input signal:** Select the correct input signal using the Source key on the projector or remote control.
How to fix blurred image on ViewSonic PJD6352 Projector?
If you're experiencing a blurred image with your ViewSonic Projector, here's what you can do: * **Focus:** Adjust the focus of the lens using the focus ring. * **Alignment:** Adjust the projection angle, direction, and height of the projector to properly align it with the screen.
General| Noise Level | 32 decibels |
|---|---|
| White Brightness | 3500 lumens |
| Native Resolution | 1024 x 768 |
| Contrast Ratio | 22000:1 |
| Aspect Ratio | 4:3 |
| Throw Ratio Range | 1.51 - 1.97:1 |
| 3D | yes |
| Minimum Screen Size | 29.9 inches |
| Maximum Screen Size | 300 inches |
| Focus Adjustment | manual |
| Minimum Distance | 3.3 feet |
| Maximum Distance | 33 feet |
| Video Input | composite video, hdmi, s-video, vga |
| Inputs | 3.5mm audio, composite video, din, hdmi, mini-usb, rca, s-video, vga |
| Sound Mode | mono |
| Built In Speakers | yes |
| Speakers Output | 10 watts |
| Remote Control | yes |
| OS Compatibility | windows, mac |
Weight and Dimensions| Depth | 9 inches |
|---|---|
| Height | 4.1 inches |
| Width | 12.4 inches |
| Net Weight | 5.1 pounds |
Regulatory compliance statement for FCC rules regarding radio frequency emissions and interference.
Declaration of compliance with European directives for electromagnetic compatibility and low voltage.
Essential guidelines for safe operation and handling of the projector, including warnings and usage rules.
Overview of the projector's capabilities, including dynamic modes, power saving, and connectivity options.
List of essential accessories included with the projector for setup and basic use.
List of accessories available for separate purchase to enhance projector functionality.
Detailed explanation of each button's function on the remote control for projector operation.
Guidance on selecting the optimal installation site for the projector based on room layout.
Step-by-step instructions for powering on the projector and initial setup procedures.
Guide to navigating and utilizing the projector's on-screen display (OSD) menus for settings.
Security feature to prevent unauthorized use via password protection and access control.
Steps for recalling, changing, or disabling the projector's password.
How to select the desired video source from connected devices.
Adjusting HDMI format and range for optimal color and picture display.
Information on connecting and using a microphone with the projector for audio input.
Instructions for attaching and using the cover to organize projector cables.
Adjusting focus and zoom to achieve a sharp and properly sized projected image.
Methods to correct trapezoidal distortion in the projected image.
Manually adjusting the shape and size of an image for unevenly rectangular projections.
Using zoom functions to magnify the projected image for detailed viewing.
Choosing the image ratio (e.g., 4:3, 16:9) to match the source signal or display requirements.
Choosing predefined picture modes (Brightest, Dynamic, Standard, Movie) for different viewing conditions.
Correcting projected colors to compensate for non-white projection surfaces.
Fine-tuning settings like brightness, contrast, color, tint, sharpness, and noise reduction.
Configuring an on-screen timer to assist with time management during presentations.
Temporarily blanking the projected image to shift audience focus to the presenter.
Preventing accidental changes to projector settings by locking the control panel keys.
Steps to set up network control for managing the projector remotely via a web browser.
Selecting audio modes (e.g., Standard, Speech, Entertainment) for sound output.
Turning the projector's audio output on or off.
Controlling the volume of the projector's speaker.
Overview of the projector's on-screen display (OSD) menu structure and navigation.
Details on menu functions related to image display properties like color, keystone, and zoom.
Explanation of picture settings including color modes, brightness, contrast, and sharpness.
Options for managing input signals, standby settings, and auto power functions.
Basic system settings including language, projector position, and splash screen.
Advanced system configurations for DCR, audio, remote control, and security.
Solutions for issues where the projector fails to power on.
Troubleshooting steps for when no image is displayed on the screen.
Guidance on resolving issues with out-of-focus or misaligned projected images.
Steps to diagnose and fix problems with the projector's remote control.
Guidelines for cleaning, storing, and transporting the projector to ensure longevity.
Instructions for fitting the dust filter and setting the filter mode.
How to check the usage hours of the dust filter.
Procedure for safely removing and cleaning the projector's dust filter.
Instructions for resetting the filter usage timer after cleaning or replacement.
Information on how the projector tracks and displays lamp usage hours.
Settings and modes (Economic, Power Saving) to maximize the projector lamp's lifespan.
Guidance on lamp replacement warnings and when it's critical to change the lamp.
Instructions and part numbers for replacing the projector lamp with a new one.
Technical details including resolution, lamp type, power, weight, and input/output terminals.
Physical measurements of the projector and its mounting screw specifications.
Information and diagrams for mounting the projector on a ceiling.
Reference table detailing IR command codes for various projector functions.
Reference table for serial communication commands (RS232) and pin assignments.
