ViewSonic PJD6352 User Manual

42
/ > < $ % + \ ' " are prohibited.
About Crestron e-Control
®
1. The Crestron e-Control
®
page provides a variety of virtual keys to control the
projector or adjust the projected pictures.
i. These buttons function the same as the ones on the OSD menus or remote control.
See "2. PICTURE menu" on page 52 and "Projector" on page 7 for details.
ii. To switch between input signals, click on your desired signal.
The Menu button can also be used to go back to previous OSD menus, exit and save menu
settings.
The source list varies according to the connectors available on the projector.
When you use the projector control panel or remote control to change the OSD menu settings,
it may take a while for the web browser to synchronize these changes with the projector.
2. The tools page allows you to manage the projector, configure the LAN control
settings and secure access of remote network operation on this projector.
i. This section is only used with the Crestron Control System. Please contact
Creston or refer to its user manual for setup information.
i
i
i
ii
You can press
/ to
reveal more
buttons.
i iv
iii
ii
v
vi

ViewSonic PJD6352 Specifications

General

Noise Level	32 decibels
White Brightness	3500 lumens
Native Resolution	1024 x 768
Contrast Ratio	22000:1
Aspect Ratio	4:3
Throw Ratio Range	1.51 - 1.97:1
3D	yes
Minimum Screen Size	29.9 inches
Maximum Screen Size	300 inches
Focus Adjustment	manual
Minimum Distance	3.3 feet
Maximum Distance	33 feet
Video Input	composite video, hdmi, s-video, vga
Inputs	3.5mm audio, composite video, din, hdmi, mini-usb, rca, s-video, vga
Sound Mode	mono
Built In Speakers	yes
Speakers Output	10 watts
Remote Control	yes
OS Compatibility	windows, mac

Weight and Dimensions

Depth	9 inches
Height	4.1 inches
Width	12.4 inches
Net Weight	5.1 pounds