51
Description of each menu
Function Description
Screen Color
See "Using Screen Color" on page 32 for details.
This function is only available when a PC input signal is
selected.
Aspect Ratio See "Selecting the aspect ratio" on page 30 for details.
Keystone See "Correcting keystone" on page 29 for details.
Corner Adj. See "Adjusting 4 corners" on page 29 for details.
Position
Displays the position adjustment page. To move the projected
image, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you made
until they reach their maximum or minimum.
This function is only available when a PC input signal is
selected.
The adjustment range may vary under different timings.
Phase
Adjusts the clock phase to reduce image
distortion.
This function is only available when
a PC input signal is selected.
H. Size
Adjusts the horizontal width of the image.
This function is only available when a PC input signal is
selected.
Zoom
See "Magnifying and searching for details" on page 30 for
details.
Color Mode See "Selecting a picture mode" on page 32 for details.
Brightness See "Adjusting Brightness" on page 33 for details.
Contrast See "Adjusting Contrast" on page 33 for details.
Color Temp.
See "Selecting a Color Temperature" on page 33 and "Setting a
preferred color temperature" on page 34 for details.
OverScan
Adjusts the overscan rate from 0% to 5%.
This function is only available when a Composite Video,
S-Video or HDMI input signal is selected.
HDMI Settings See "Changing HDMI input settings" on page 27 for details.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
