5. Start browser in PC and specify following URL, then click “Go” button.
URL: http://(Projector IP address)/
For example, if projector IP address is 169.254.1.1, specify URL:http://169.254.1.1/.
6. If connection succeeds, the login screen is displayed. Enter your User name and Password
and click “OK”. Below are the factory default settings for administrator, user and passwo rds.
Control the projector via a web browser
Login
If the administrator and user passwords are disabled, it will directly go into the status
page.
Confidential - Do Not Copy
ViewSonic Corporation
PJD6531w
To Next Page
Loading...
