Need help?Do you have a question about the ViewSonic PJD6531w and is the answer not in the manual?
General| Native aspect ratio | 16:10 |
|---|---|
| Projection distance | 1.2 - 10 m |
| Vertical scan range | 50 - 120 Hz |
| Horizontal scan range | 31 - 80 kHz |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:10 |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 27 - 300 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | ± 40 ° |
| Focus | Manual |
| Throw ratio | 1.5 - 1.8:1 |
| Focal length range | - mm |
| Lamp power | 230 W |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 6000 h |
| Full HD | No |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, PAL, SECAM |
| RMS rated power | 10 W |
| Number of built-in speakers | 2 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 0 |
| S-Video inputs quantity | 1 |
| VGA (D-Sub) ports quantity | 3 |
| Cables included | VGA |
| HDCP | - |
| Noise level | 34 dB |
| Certification | CB, WEEE, UL/cUL, FCC-B, ICES-003, IRAM, NOM, PSB, C-tick, EK, CE, TUV/GS, GOST-R, Hygienic, SASO UKrSEPRO, CCC |
| Noise level (economic mode) | 29 dB |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 305 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Product color | Black |
| Market positioning | Presentation |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 114 mm |
|---|---|
| Width | 280 mm |
| Height | 218 mm |
| Weight | 1850 g |
| Package depth | 305 mm |
| Package width | 345 mm |
| Package height | 220 mm |
| Package weight | 4500 g |
To Next Page
