To Next PageTo Next PageWhat to do if my ViewSonic X1 does not turn on?
If your ViewSonic Projector isn't turning on, first, make sure the power cord is securely plugged into both the projector and the power outlet. If the cooling process is still running, wait for it to complete before attempting to turn the projector on again. You might also want to try a different power outlet or test the current outlet with another electrical device.
What to do if ViewSonic Projector remote control does not work?
If your ViewSonic Projector's remote control isn't working, first ensure there are no obstructions between the remote and the projector, and that you're within 8 meters (26 feet) of the projector. Then, check the batteries and replace them if necessary.
Why is there no picture on my ViewSonic X1 Projector?
If you're not seeing a picture on your ViewSonic Projector, verify that the video source cable is properly connected and the video source is powered on. If the input source isn't automatically selected, manually choose the correct source using the Source key on either the projector or the remote control.
General| Number of colors | 1.07 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | 1.53 - 4.98 m |
| Vertical scan range | 23 - 120 Hz |
| Horizontal scan range | 15 - 135 kHz |
| Projection technology | LED |
| Screen size compatibility | 60 - 150 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, horizontal | 40 ° |
| Service life of light source | 30000 h |
| Throw ratio | 1.15 - 1.5 |
| Zoom capability | Yes |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 3 |
| Bluetooth version | 4.2 |
| Internal storage capacity | 16 GB |
| Noise level | 31 dB |
| Number of OSD languages | 24 |
| Noise level (economic mode) | 27 dB |
| On Screen Display (OSD) languages | CHI (SIMPL), DUT, ENG, ESP, FIN, FRE, ITA, JPN, POL, RUS, THA, TUR |
| Cables included | Power, USB Type-C |
| Operating temperature (T-T) | 0 - 40 °C |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 218 W |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Home cinema |
| RMS rated power | 12 W |
Weight and Dimensions| Depth | 244 mm |
|---|---|
| Width | 355 mm |
| Height | 121 mm |
| Weight | 3600 g |
| Package depth | 376 mm |
| Package width | 490 mm |
| Package height | 413 mm |
| Package weight | 5500 g |
Details button functions for different operational modes.
Guides on selecting the optimal projector placement.
Step-by-step guide to set the projector password.
Procedure to modify the current password.
Steps to turn off the password security feature.
Instructions for connecting the projector's power cord.
How to connect video sources via HDMI and USB-C.
Steps to power the projector on and off.
Initial configuration for new users.
How to set projector height and projection angle.
Using zoom and focus rings for optimal image.
Manually shaping the image for uneven sides.
General instructions for using the OSD menu.
How to use directional buttons on the home screen.
Lists common issues and their potential solutions.
Settings to prolong the light source lifespan.
