17
Using the Password Function
To help prevent unauthorized access or use, the projector offers a password
security option. The password can be set through the On-Screen Display (OSD)
Menu.
NOTE: Make note of your password, and keep it in a safe place.
Setting a Password
1. Press MENU or
to open the OSD Menu and go to: SYSTEM > Security Settings
and press ENTER/OK.
2. Highlight Power On Lock and select
On by pressing
/ .
3. As pictured to the right, the four
arrow keys (
, , , ) represent
4 digits (1, 2, 3, 4). Press the arrow
keys to enter a six digit password.
5. Confirm the new password by re-entering the new password. Once the password
is set, the OSD Menu will return to the Security Settings page.
6. Press EXIT or
to leave the OSD Menu.
NOTE: Once set, the correct password must be entered every time the projector is
started.