ViewSonic X1 - Menu Functions Overview; OSD Menu Operation Guide

30
Menu Functions
This section will introduce the On-Screen Display (OSD) Menu and its options.
General On-Screen Display (OSD) Menu Operation
NOTE: The OSD screenshots in this manual are for reference only and may dier from
the actual design. Some of the following OSD sengs may not be available.
Please refer to the actual OSD of your projector.
The projector is equipped with an On-Screen Display (OSD) Menu for making
various adjustments. It can be accessed by pressing MENU or on the projector or
remote control.
1. Press / to select a main menu. Then press ENTER/OK or use / to access
the sub-menu list.
2. Press
/ to select the menu opon. Then press ENTER/OK to display its sub-
menu, or press / to adjust/select the seng.
NOTE:
Some sub-menu opons may have another sub-menu. To enter the respecve
sub-menu, press
ENTER/OK. Use / or / to adjust/select the seng.