EasyManuals Logo

ViewSonic X1 User Manual

ViewSonic X1
77 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
77
Light Source Information
This section will provided a better understanding of your projector’s light source.
Light Source Hour
When the projector is being used, the duration (in hours) of light source usage is
automatically calculated by the built-in timer.
To obtain the light source hour information:
1. Press Menu to open the OSD Menu and go to: Advanced > Light Source Settings
> Light Source Hours Information.
2. Press Enter and the Light Source Hours Information page will appear.
3. Press
Exit to leave the menu.
Extending Light Source Life
To prolong light source life, you can adjust the following settings in the OSD Menu.
Setting Light Source Mode
Setting the projector in any mode other than Normal reduces system noise, power
consumption, and extends the light sources operational life.
Light Source Mode Description
Normal Provides full light source brightness.
Eco
Reduces light source power consumption by 20% and lowers
brightness, and decreases fan noise.
Dynamic Black 1
Reduces light source power consumption by up to 70%
depending on the content's brightness level.
Dynamic Black 2
Reduces light source power consumption by up to 50%
depending on the content's brightness level.
Custom
Allows you to adjust the light source power to extend the light
source life and decreases the fan noise.
To set the Light Source Mode, open the OSD Menu and go to: Advanced >
Light Source Settings > Light Source Mode and press / to select and press
Enter.
Setting Auto Power Off
This allows the projector to turn off automatically after a set period of time once no
input source is detected.
Open the OSD Menu and go to: POWER MANAGEMENT > Smart Energy >
Auto Power Off and press
/
to disable or adjust the time.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ViewSonic X1 and is the answer not in the manual?

ViewSonic X1 Specifications

General IconGeneral
Number of colors1.07 billion colors
Native aspect ratio16:9
Projection distance1.53 - 4.98 m
Vertical scan range23 - 120 Hz
Horizontal scan range15 - 135 kHz
Projection technologyLED
Screen size compatibility60 - 150 \
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal40 °
Service life of light source30000 h
Throw ratio1.15 - 1.5
Zoom capabilityYes
HDMI connector typeFull-size
Serial interface typeRS-232
USB 2.0 ports quantity3
Bluetooth version4.2
Internal storage capacity16 GB
Noise level31 dB
Number of OSD languages24
Noise level (economic mode)27 dB
On Screen Display (OSD) languagesCHI (SIMPL), DUT, ENG, ESP, FIN, FRE, ITA, JPN, POL, RUS, THA, TUR
Cables includedPower, USB Type-C
Operating temperature (T-T)0 - 40 °C
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 / 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)218 W
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
RMS rated power12 W
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width355 mm
Height121 mm
Weight3600 g
Package depth376 mm
Package width490 mm
Package height413 mm
Package weight5500 g

Related product manuals