ViewSonic X1 - Technical Specifications; Projector Specifications

70
Specifications
Item Category Specifications
X1 X2
Projector Type 0.65” LED
Display Size 30”~300”
Throw Ratio 1.15~1.5
(95”±3%@2.43m)
0.69~0.83
(95”±3%@1.44m)
Lens F = 2.59 – 2.87 F = 2.60 – 2.78
Optical Zoom 1.3x 1.2x
Light Source Type RGB LED
Display System 1-CHIP DMD
Input signal HDMI
f
h
: 15K~129KHz, f
v
:23~120Hz,
Pixel rate: 170MHz
Resolution Native 1920 x 1080
Power adapter
1
Input Voltage AC 100-240V, 50/60 Hz (auto switch)
Operating
conditions
Temperature 0°C to 40°C (32°F to 104°F)
Humidity 0% to 90% (non-condensing)
Altitude 0 to 1,499 m at 0°C to 35°C
1,500 to 3,000 m at 0°C to 30°C
Storage
conditions
Temperature -20°C to 60°C (non-condensing)
Humidity 0% to 90% (non-condensing)
Altitude 0 to 12,200 m at 30°C
Dimensions Physical (W x H x D) 355 x 121 x 244 mm
(14” x 4.8” x 9.6”)
355 x 121 x 251 mm
(14” x 4.8” x 9.9”)
Weight Physical 3.6 kg (7.94 lb)
Power
consumption
On
2
218 W (Typical)
Off < 0.5W (Standby)
1
Please use the power adapter from ViewSonic® or an authorized source only.
2
The test condition follows EEI standards.
Appendix