ViewSonic X1 - Smart System Features; Navigating the Home Screen

55
Smart System
This section will introduce the SMART SYSTEM.
Home Screen
NOTE: The screenshots in this manual are for reference only and may dier from
the actual design. Some of the following sengs may not be available. Please
refer to the actual design of your projector.
The Home Screen is displayed when the input source is SMART SYSTEM. To
navigate the Home Screen, simply use the directional buttons. You can return to
the main Home Screen at any time by pressing on the remote control, regardless
of what page you are on.
1. Press / to select a main menu. Then press ENTER/OK or use press to
access the sub-menu list.
2. Press
/ / / to select the menu opon. Then press ENTER/OK to display its
sub-menu, or press / to adjust/select the seng.
NOTE:
Some sub-menu opons may have another sub-menu. To enter the respecve
sub-menu, press
ENTER/OK. Use / or / to adjust/select the seng.