ViewZ VZ-PVM-I2B3N - OSD Control and Function

13User Manual Visit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Volume
Detect Source Signal Message
Select Input Source
Press◄ / ► buons to adjust volume on monitor
Press◄ / ► buons to adjust volume on remote controller
Press 'SOURCE' buon on monitor or 'INPUT' buon on remote controller
Press ▲ / ▼ buon to change input source and then press ◄ / ► buon to select input source on monitor
Press ▲ / ▼ buon to change input source and then press ◄ / ► buon or Enter to select input source on remote
controller
VGA
HDMI
CAMERA
AV
MEDIA
If you connect any input source, monitor will display current input source resoluon and frequency.