Vigia NM 343 - Operational Mode Details and Alerts; Manual Pressure Display Mode; Air Leak Detection and Alarms

7
USER'S MANUAL
ENGLISH
Manual Mode: If you want to see only one
pressure constantly you may congure it to
manual mode pressing for 3 seconds the
keys
or . Once the manual mode
is congured you will see the pressures 1,
2, 3 (or more) y and the inlet pressure P
pressing the keys
or .
To go back to sequential mode, press the
keys
or
for 3 seconds.
40
3
BAR
160
11
BAR
60
80
100
120
140
BAR
PSI
4
5
6
7
8
9
10
PSI
PSI
40
3
BAR
160
11
BAR
60
80
100
120
140
BAR
PSI
4
5
6
7
8
9
10
PSI
PSI
3 SECONDS
Explanation: If there is a pressure loss (tire puncture) the con-
trol panel automatically goes into sequential mode to alert the
driver of the problem.
Air Leak
The panel will indicate the magnitude of the air loss through an alarm:
Small loss: 1 beep every 9 seconds
Medium loss: 2 beeps every 5 seconds
Big loss: 3 beeps every 2 seconds
Important: For every case, repair the air loss and/or contact
the closest ocial service.
If there is more than one air loss the control
panel wil only indicate the sequential
losses.
For example: If there is an air loss in
pressures 2 and 3, the display will indicate
pressure 2 for 10 seconds, then pressure
3 for 10 seconds and so forth, but it will
not indicate pressure 1.
40
3
BAR
160
11
BAR
60
80
100
120
140
BAR
PSI
4
5
6
7
8
9
10
PSI
PSI
10 SECONDS