XMA Limited, VHQ, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ
Tel: 01727 201 850 | Fax: 01727 201858 | Email: technical@viglen.co.uk| Web: www.xma.co.uk
BIOS settings for Windows 7 and Windows 10 O/S
Windows UEFI mode for Windows 8.1/10
Vig830s system configured with Windows 8/8.1 will have following default BIOS settings. If
you wish to downgrade to Windows 7 then BIOS must be configured to Non-UEFI mode.
Boot\CSM (Compatibility Support module)
Launch CSM [Enabled]
Boot Device Control [UEFI Only]
Boot from Network Devices [UEFI drivers first]
Boot from Storage Devices [UEFI drivers first]
Boot from PCI-E/PCI Expansion Devices [UEFI drivers first]
Boot\Secure Boot Menu
OS Type [Windows UEFI mode]
Please ensure the changes of the following settings are performed by personnel with some previous
experience/knowledge of altering BIOS settings.
Enabling Windows UEFI mode for Windows 8/8.1 & 10 Operating System
1. From the BIOS main menu bar select ‘Advanced’
2. Navigate to the Boot sub menu
3. Select CSM (Compatibility Support Module)
Figure 6
To Next Page
Loading...