Need help?Do you have a question about the Viglen Vig642M and is the answer not in the manual?
Explains European standards for product compliance with the 'CE' mark.
Defines EMC and its significance for electrical devices.
Details Viglen's in-house EMC testing and maintenance guidelines.
States that manual material is subject to change without notice.
Lists registered trademarks and copyright information.
Disclaims warranty and limits vendor liability for manual usage.
Introduces the Viglen Vig642M motherboard and its primary function.
Highlights features like form factor, ports, and CPU support.
Specifies Micro-ATX form factor and supported Intel processors.
Details the Intel H61 Express Chipset and memory capabilities.
Describes graphics, audio, and network interface features.
Lists external connectors on the motherboard's back panel.
Lists internal headers and connectors on the motherboard.
Lists available PCI Express slots.
Details processor compatibility and maximum TDP.
Explains the Intel H61 Platform Controller Hub (PCH).
Explains memory features, voltage, and organization modes.
Explains integrated graphics via Intel FDI and supported interfaces.
Details VGA and DVI port capabilities and resolutions.
Describes PCI Express 3.0 x16 slot capabilities.
Details Intel High Definition Audio features and connectors.
Explains the S/PDIF header for digital audio output.
Describes the Realtek Gigabit Ethernet Controller and its features.
Explains the status LEDs on the RJ-45 LAN connector.
Details USB 2.0 port support and arrangement.
Explains SATA connectors and BIOS settings for AHCI/RAID.
Lists available expansion slots.
Describes features of the Legacy I/O controller.
Explains the function of the RTC, CMOS RAM, and battery.
Describes automatic configuration of SATA and PCI/PCIe devices.
Explains supervisor and user password security features.
Identifies components and maps labels to motherboard connections.
Details PS/2, USB, HDMI, VGA, LAN, and Audio connectors.
Critical safety warnings before performing hardware procedures.
Warning about electrostatic discharge (ESD) and component sensitivity.
Provides steps to prevent electrostatic discharge during handling.
Warning about proper handling of jumpers to avoid damage.
Explains the function of the JBAT1 jumper for clearing CMOS.
Details the JFP1 connector for front panel switches and LEDs.
Explains ATX 24-pin and 4-pin power connectors and requirements.
Explains the JAUD1 connector for front panel audio.
Describes the JUSB1/JUSB2 connectors for front panel USB ports.
Explains the JSP1 connector for S/PDIF digital audio.
Details the JTPM1 connector for Trusted Platform Modules.
Explains the CPUFAN and SYSFAN connectors and wiring.
Describes SATA ports and notes on cable handling.
Describes PCI Express slots and their transfer rates.
Safety note about unplugging power before handling expansion cards.
Critical safety warning before installing/removing a CPU.
Steps to unlatch the CPU socket lever and lift the load plate.
Step 3: How to remove the CPU from its protective cover.
Step 4: Aligning and installing the CPU into the socket.
Step 5: How to lower and latch the CPU socket lever.
How to connect the CPU fan's power cable to the header.
Step-by-step guide for installing RAM modules.
Step-by-step guide for removing RAM modules.
Visual guide for installing RAM modules into DIMM sockets.
Warning about potential explosion from incorrect battery replacement.
Visual guide for removing the CMOS battery.
Contact information for Viglen Technical Support.
Explains soft boot and cold boot procedures.
Safety warnings before disconnecting cables.
Explains the POST process and error reporting.
Lists common hardware and software issues with solutions.
Addresses CMOS settings errors, diskette, and hard drive light issues.
Explains the Basic Input/Output System and its role.
Describes the POST routine and system testing during startup.
Explains BIOS upgrades using utilities.
Step-by-step guide for updating BIOS using AWDFLASH.
Steps to follow after the BIOS update utility finishes.
Instructions on how to enter the BIOS Setup utility.
Lists the keys used for navigation and control within BIOS Setup.
Explains how to access context-sensitive help in BIOS Setup.
Explains how to navigate and use sub-menus in BIOS Setup.
Overview of main menu bar options and their functions.
Setting passwords, boot order, and system date/time in BIOS.
Loading default BIOS settings and saving changes to exit.
Questions for user feedback to improve manuals.
Address for returning feedback slips to Viglen.
General| Brand | Viglen |
|---|---|
| Model | Vig642M |
| Category | Motherboard |
| Language | English |
To Next Page