1/9
Hardware Installation Manual
Support：VG-X4
Overall Size：570×436×88（L×W×H）
Print Size：310×256mm（L×W）
Powered by VigoTec 2019.
Catalogue: 1. Parts list, 2. Installation, 3. Notice
1．Parts list
1.1 list of VG-X4 Writing Machine Kits
Serial N Parts Quantity
F1 430mm Aluminum profile 1
F2 360mm Aluminum profile 1
F3 50mm Aluminum profile 4
P1 Acrylic central plate A（Top，Thickness 8mm） 1
P2 Acrylic central plate B（Middle，Thickness 8mm） 1
P3 Acrylic central plate C（Bottom，Thickness 8mm） 1
P4 Acrylic motor plate（Thickness 8mm） 2
P5L、P5R Acrylic leg A（Inside，Thickness 8mm） 2
P6 Acrylic leg B（Outside，Thickness 5mm） 2
P7 Acrylic rear plate A（Thickness 8mm） 1
P8 Acrylic rear plate B（Thickness 5mm） 1
P9 Acrylic front plate（Thickness 8mm） 1
W1 Flat pulley 8
M1 Stepper motor 2
M2 Synchronous pulley and Set screw 2 kits
W2 Driven pulley 4
S1
Inner hexagon screw（M5×45，Fastening the acrylic central plate and
flat pulley）
8
S2 Inner hexagon screw（M5×20，Fastening the acrylic leg plate, front
plate, rear plate and pen control kit/Laser kit）
9
S3 Inner hexagon screw（M5×12，Fastening the acrylic motor, leg and
front plate）
25
N1 Antiskid nut（M5，Fastening the acrylic central plate and flat pulley）
To Next Page
Need help?
General