EasyManuals Logo

Viking pump LQE4195 User Manual

Default Icon
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SECTION TSM 144.1
PAGE 1 OF 10
ISSUE B
VIKING PUMP, INC. A Unit of IDEX Corporation Cedar Falls, IA 50613 USA
TECHNICAL SERVICE MANUAL
CONTENTS
INTRODUCTION
The illustrations used in this manual are for identification
purposes only and cannot be used for ordering parts. Obtain a
parts list from the factory or a Viking® representative. Always
give complete name of part, part number and material with
model number and serial number of pump when ordering
repair parts. The unmounted pump or pump unit model
number and serial number are on the nameplate.
In the Viking model number system, basic size letters are
combined with series number (4195) are used to indicate
either an unmounted pump or mounted pump unit.
FIGURE 1
KE, KKE, LQE, & LSE 4195 SERIES - Flange & Foot Mounted Unmounted Pumps with Flanged Ports
Q & QS 4195 SERIES - Foot Mounted Unmounted Pumps with Flanged Ports
Introduction . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Information. . . . . . . . . . . . . . . . . . . . 2
Special Information . . . . . . . . . . . . . . . . . . . 3
Special Mechanical Seals. . . . . . . . . . . . . . . . 3
Maintenance . . . . . . . . . . . . . . . . . . . . . . 3
Disassembly . . . . . . . . . . . . . . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . . . . . . . . . . 7
Thrust Bearing Adjustment . . . . . . . . . . . . . . . 8
Installation of Carbon Graphite Bushings . . . . . . . . 8
Pressure Relief Valve Instructions . . . . . . . . . . . 9
UNMOUNTED PUMP UNITS
Flange & Foot Mounted Units are designated by the
unmounted pump model
numbers followed by a
letter(s) indicating drive style.
D = Direct Drive
M = Horizontal Direct Drive
R = Reducer Drive
KE4195
KKE4195
LQE4195
LSE4195
Foot Mounted
D = Direct Drive
R = Reducer Drive
Q4195 QS4195
This manual deals only with Series 4195 Heavy Duty Pumps.
Refer to Figures 1 through 10 for general configuration and
nomenclature used in this manual. Pump specifications and
recommendations are listed in Catalog Section 144, Series
4195 and 495 Heavy Duty Pumps.
Electronic copies of the most current TSM issue can be found on the Viking Pump website at www.vikingpump.com
HEAVY-DUTY PUMPS
SERIES 4195
SIZES KE, KKE, LQE, LSE, Q, & QS
KE-KKE LQE-LSE Q-QS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Viking pump LQE4195 and is the answer not in the manual?

Viking pump LQE4195 Specifications

General IconGeneral
ModelLQE4195
CategoryWater Pump
SeriesLQE
Max Pressure150 PSI
Seal TypeMechanical Seal
Size4 inch
Inlet Size4 inch
Outlet Size4 inch
Drive TypeDirect
RotationClockwise

Related product manuals