Viking Range 7 Series - Replacing Oven Lights

30
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse
or circuit breaker before replacing bulb.
WARNING
DO NOT touch bulb with bare hands. Clean off any
signs of oil from the bulb and handle with a soft cloth.
1
1
4
2
3
1. Unsnap glass light cover using a screwdriver in the access groove.
2. Firmly grasp light bulb and pull out.
3. Replace with halogen bulb using volt and wattage requirements listed on glass
cover.
4. Replace the light cover by snapping glass cover onto metal box.
5. Reconnect power at the main fuse or circuit breaker.
Replacing Oven Lights
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and
handle with a soft cloth.
Cleaning and Maintenance