Page 7For technical questions, please call 1-888-866-5797.59491
SAFETYOPERATIONMAINTENANCE SETUP
LCD Display
Battery
Level
Charging Status
Battery Temperature
Alert Indicator
Discharge Status
Input/Output
Ports Indicators
Charging the Jump Starter
IMPORTANT: YOU MUST CHARGE
COMPLETELY BEFORE FIRST USE AND EVERY
3-6 MONTHS OR VOIDS WARRANTY.
WARNING! TO PREVENT SERIOUS INJURY:
Charge on a non-flammable surface.
Note: Do not attempt to charge the Jump
Starter when it is below 32° F. Only use the
chargers and charging cable included with
this Jump Starter to charge Jump Starter.
Note: For best results, only use the Wall
Charger included with the Jump Starter.
Notice: For manual reset resuming the charging
process, unplug and replug the Charging Cable.
1. Plug Charging Cable into the Jump Starter
input port, and then plug USB end of
Charging Cable into the Wall Charger.
Charge time is approximately 4-5 hours.
2. When the Jump Starter is fully charged, unplug
Charging Cord from the outlet and the unit.
To Next Page
Loading...
