Page 9For technical questions, please call 1-888-866-5797.59491
SAFETYOPERATIONMAINTENANCE SETUP
User Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY: Unplug the Jump Starter, turn the Power Switch off and allow
Jump Starter to cool completely before performing any inspection, maintenance, or cleaning procedures.
1. BEFORE EACH USE, inspect the general condition of the Jump Starter. Check for:
• loose hardware
• cracked or broken parts
• damaged electrical wiring or cable insulation
• any other condition that may affect its safe operation.
2. Keep unit clean and clamps free of dirt, debris, or grease.
3. For longer working life, protect unit from sunlight and moisture. Do not
store in any environment with extreme hot or cold.
4. Li-Ion BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.
Do not short, incinerate or open battery.
5. AFTER USE, wipe external surfaces of the Jump Starter with clean cloth.
Battery Disposal
WARNING! TO PREVENT SERIOUS INJURY: CONTAINS LITHIUM BATTERY.
BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.
1. Open housing and cut wires from Battery with insulated wire clippers and remove.
2. Disposing of the Jump Starter must comply with standards for hazardous waste disposal in your area. Contact
your local city government office for the nearest hazardous waste disposal area in your community.
To Next Page
Loading...
