618
VIKING RANGE
DESIGNER SERIES DFUD140
WASH PROGRAMS
# of Main #of Heated Cycle Time Max. Water
Program Prewashes Wash Rinses Drying (Min.) Usage (Gal)
Pots &
Pans/Sani 2 Yes 2 short, 2 normal Yes 100 6.6
Normal
2 Yes 1 short, 1 normal Yes 85 4.6
Quick 1 short Yes 1 short, 1normal Yes 50 3.9
Rinse & Hold N/A N/A 1 short N/A 4 0.9
Notes: (1) During pre-wash, the dirty water is emptied and the next cycle starts clean water.
(SCS=Super Clean System)
(2) You must have the Heat dry option on to activate heated drying.
(3) Cycle time is approximate. Variations will occur based on household water
temperature and the time it takes the unit to heat the water entering the machine.
Options Definition
Economy When used with the low temperature, this option further reduces energy consumption without
diminishing cleaning performance by lowering the water temperature in the prewash and main
wash and extending the wash time.
Temp Heats the main wash and rinse programs to the high temperature. The indicator light glows
when high is selected.
Heat Dry Activates the heating element during the drying cycle to speed up the drying process.
Delay Delays starting the dishwasher for five hours. After selecting the wash program, press Delay
then start.
Press this button to Start or Stop the machine. To interrupt a program, hold this button down
for three seconds.
To Next Page
Loading...
