Viking K-1900 Series User Manual

PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
COMMUNICATION & SECURITY SOLUTIONS
Features
K-1900 Series
Hot Line Phones
April 27, 2016
Applications
Specifications
www.vikingelectronics.com
Information: (715) 386-8861
VIKING
The K-1900 Series of Hot-Line phones
are programmable to dial a 1-32 digit
telephone number each time the
phone’s handset is lifted. The products
may be programmed to Touch Tone or
pulse dial and will not dial on incoming
calls.
The K-1900 Series phones are
available in a desk or wall chassis
configuration. A network insert dialer is
also available, to convert standard
phones into hot-line phones.
Economical and Vandal Resistant
Hot-Line Phones
Power: Telephone line powered (20V DC/18mA
minimum)
Environmental: 0°C to 32°C (32°F to 90°F) with
5% to 95% non-condensing humidity
Dimensions: (see page 2)
Dialing Speed: Normal - 120ms tones/10 pps,
Fast - 50ms tones/20 pps
• Catalog sales
• Information kiosks in malls
• Courtesy and customer service phones
• Automated tellers
• Hot-line reservation phones
• Replace leased Ringdown circuits
• Security and emergency phones
• Telephone line powered
• Hearing aid compatible amplified handsets
• Rotary handset volume control
• 1 - 32 digit programmable speed dial number
• Touch Tone and 10/20 pps pulse dialing
• Non-volatile memory (no batteries required)
• Restricts fraudulent calls from hand held dialers
• K-1900D/W-2 available in red or ash
• Optional Q170600 ringer (DOD# 834)
• Operates on a C.O. line or analog PABX/KSU
extensions
• Ring detection (will not dial on incoming calls)
• Programmable security code to enter the
programming mode
• Touch Tone programmable
• K-1900-6 fits standard 500, 554, 2500 and 2554
set phones
K-1900D-2
Ash / Red
K-1900W-2
Ash / Red
K-1900-6

Viking K-1900 Series Specifications

General

Power	Via telephone line
Loop Current	20mA minimum
Lines	1
Frequency Response	300Hz to 3400Hz
Power Source	Telephone line
Compliance	FCC Part 68
Transmit Frequency Response	300Hz to 3400Hz
Receive Frequency Response	300Hz to 3400Hz

Summary

Economical and Vandal Resistant Hot-Line Phones

Features

Applications

Specifications

Specifications and Installation

K-1900D-2 Hot Line Desk Phone Installation

Describes installation steps for the K-1900D-2 desk phone model using an RJ11 plug.

K-1900W-2 Hot Line Wall Phone Installation

Details installation for the K-1900W-2 wall phone, connecting via RJ11W.

K-1900-6 Hot Line Desk Phone Installation

Explains installation of the K-1900-6 for various phone types, showing wiring.

Programming

Overview of the programming mode and exiting procedures for the K-1900 Series.

Programming Without Security Code

Quick Programming Features

Programming Examples

Touch Tone and Pulse Dial Speeds

Security Code

Touch Tone or Pulse Dialing

Touch Tone User Dialing Restriction

Adding an Internal Ringer

Warranty

Returning Product for Repair

Procedure for returning equipment to Viking for repair, including RA number.

Returning Product for Exchange

Procedure for out-of-box failures within 10 days, requiring RA number.

Two Year Limited Warranty

Details Viking's two-year warranty, exclusions, and limitations of liability.

FCC Requirements

Information regarding FCC Part 68 rules, REN, and connection to telephone network.

Part 15 Limitations

States compliance with FCC Part 15 for digital devices and potential interference.