Viking MB 655 - Installing Blade Stop; Quick-Start Control Bar

RA_6360_6375_01 - EN 26
- Control bars and levers -
- Attach inside left housing half
(see section 02.04.03)
- Attach inside right housing half
(see section 02.04.02)
• Remove locking lever 1 from control
bar 2.
12
03.03.02 Installing blade
stop / Quick-Start
control bar
• Fit detent lever 1 onto control bar 2.
12
• Press control bar 1 together and
insert in guides A.
• Engage locking lever 1 in detent
lever 2.
1
A
1
A
1