Viking MB 655 - Replacing Gearbox Support; Removing Single-Speed; Vario Gearbox Support; Installing Single-Speed; Vario Gearbox Support; Removing Three-Speed Gearbox Support

- Gearbox -
• Remove bolts 1.
• Remove gearbox support 2
upwards.
1
1
2
• Insert gearbox support 1 from
above.
• Tighten bolts 2 (5-6 Nm).
1
2
2
06.04.03 Removing three-speed
gearbox support
06.04.04 Installing three-speed
gearbox support
- Remove housing cover assembly
(see section 05.02.01)
- Attach housing cover assembly
(see section 05.02.04)
06.04 Replacing gearbox
support
• Remove screw 1.
• Slightly raise gearbox support 2 and
remove downwards.
• Attach gearbox support 1 from
below (bore in gearbox support
aligns with second lug from right in
housing).
• Tighten screw 2 (5-6 Nm).
06.04.01 Removing single-
speed / Vario gearbox
support
06.04.02 Installing single-
speed / Vario gearbox
support
- Remove housing cover assembly
(see section 05.02.01)
- Attach housing cover assembly
(see section 05.02.04)
70 RA_6360_6375_01 - EN