EasyManua.ls Logo

Viking MI 422 - Fault: Docking not working; Fault: The robotic mower travels past the docking station or docks at an angle; Fault: The robotic mower has crossed the perimeter wire

Viking MI 422
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
149
DEFRNLIT EN
0478 131 9923 B - EN
Divided mowing area with a pond and a
free-standing tree
Docking station:
Location (1) directly next to the house A
No-go area:
Installation around the free-standing tree,
based on a linking section installed at right
angles to the edge.
Pond:
For safety reasons (specified wire
clearance) the perimeter wire (2) is routed
around the pond B.
Wire clearances: (Ö 11.5)
Clearance to edge: 22 cm
Clearance to the obstacle that can be
travelled on: 0cm
Around the tree: 24 cm
Clearance to the pond: 100 cm
Confined area:
Installation of a corridor (3). Wire
clearance: 22 cm (Ö 11.10)
Programming:
Define the total size of the mowing area,
program two starting points (4) (close to
the docking station and in the contorted
corner near the pond) (Ö 10.15)
Particularities:
Unmown areas, e.g. B around the pond
must be mown manually on a regular basis
or cut using a suitable lawn trimmer.

Table of Contents

Related product manuals